Weird Routing Issue
I have an issue in the network below where R3 can't reach R1 (in that direction only). R1 can reach R3 (as verified with a debug for ICMP pings). I have a 3 routers and a FW in this setup, and the...
View ArticleEIGRP flaping on N7K
Hi Evryone!I have strange flapping situtaion on my two N7K they have VPC-PEER-LINK (the port-channel) (don't have vlan 302, it's excluded), and second connection is via 10G normal trunk, who have only...
View ArticleiBGP full mesh
Hi there,I have question about iBGP full mesh, To solve BGP split horizen issue, we need to make full mesh all iBGP.I know that there is route reflector to decrease number of BGP peer.The question is...
View ArticleCCNA Video
Hello, I was wondering if there was going to be any learning materials from INE on the CCNA Video line?Thanks!
View ArticleAutomatic reply: How to save/load UCS configs
Jag är på utbildning och återkommer den 13/2 - 2015, jag kommer att läsa mail sporadiskt under denna tidI'm away on training and will return the 13 of february 2015, i will check mail from time to time
View ArticleHow to save/load UCS configs
Hi All,I tried to save and load UCS configs from many Labs now, but I've never managed to get it working (load config highlighted in blue, but nothing is moving anywhere)...I'm doing my UCS Lab with a...
View ArticleACL Deny log
Hi Guys,I'm trying to build a new access-list for some dmvpn hub routers that are also using IPSec. I want to know how you can identify precisely the rules and ports to allow through from using logs...
View ArticleUK Study group/ Partner
Hi All, I am currently starting to study for CCIE R&S, I think being part of a study group would be useful. I am based in the UK. Please feel free to message me. Cheers, Andrew
View ArticleClik here to view.
Unable to boot ESXi (PSOD)
I've been using the INE racks (with the UCS add-on), and I was unable to get the ESXi to boot. It would PSOD every single time. According to VMWare's KB, this particular error points to a corrupt...
View ArticleCisco Documentation
Doing the INE ATC video, I see Brian McGahan using the Cisco Docs. a lot, and I try to do the same.But new releases are out, and the placement of the configurationguides seem very random.Is it me or...
View ArticleCisco C6500 to NX7006 refresh
Anyone out there work on a C6500 to N7K migration? Would like to see the detailed plan if possible.
View ArticleCollaboration Workbooks
Hi Guys,Can someone please help me understand what is the next step after i completed watching the Collaboration ATC videos?I intend to use the INE's Rack rental but i am very confused about the study...
View ArticleEIGRP Poisoned Floating Summarization
Am I right in thinking that in IOS 15.X, a poisoned summary route will NOT make it to the routing table and will NOT be advertise? Where in IOS 12.X, the summary route does not get placed in the...
View ArticleClik here to view.
Redistribution Case #2 Question.
R9 is redistributing its loopback into EIGRP which both R1 and R3 learn.R1 sends the loopback from EIGRP into OSPF per its OSPF to EIGRP redistribution.R3 then installs the lower AD route via OSPF and...
View ArticleIPV6 RA Suppress
I cant find where the below statmet out of the IPV6 Autoconfig lab is true. The command appears to be wrong and even if you use "no ipv6 nd ra suppress" command it does not show up in the running...
View ArticleLDP | Session hold time
It appears that LDP has 4x different holddown timers, three listed in the output of "show mpls ldp param" and the forth being "session protection" duration.3 of the 4 I fully understand their use and...
View ArticleWorkbook mistake (?) in RIP
Hi guys,Anyone can help to confirm this for me: 1. RIPv2 Filtering with Prefix Lists: Using a prefix-list, configure R5 to filter any IPv4 updates received inbound from R4 over the DMVPN cloud.Solution...
View ArticleOTV not passing traffic between sites
I have configured OTV as per INE Nexus Technology Labs OTV specified..it did not work. I reset the devices and copy paste the configuration from workbook, still did not work. I have run out ideas after...
View ArticleClik here to view.
BGP Free core with MPLS traceroute issue
Hi experts,I'm currently testing out BGP free core using mpls and i'm missing some traces between endpoint. Here is topologyGoal is to tunnel traffic from AS4 to AS5 over the mpls core without running...
View ArticleNexus 7000 White Papers
Anyone knows what happened to the Nexus 7000 White Papers List ? http://www.cisco.com/c/en/us/products/switches/nexus-7000-series-switches/white-paper-listing.html Thanks. Regards, Antonio Soares,...
View Article