Remote access vpn
Hello sir We configure Remote access vpn using DVTI with virtual-templete. Whenever any client connect to server and after successfully negotiate its sa parameter, on server side automatically create a...
View ArticleVTI vs L2L IPSEC Overhead
Good morning, I have a question about the overheads of VTI vs L2L IPSEC vs GREafter watching Brian M's VTI video on the CCIE security advanced tecnologies class - I decided to test the same in my own...
View ArticleINE's CCIE R&Sv5 Expanded Blueprint
INE's CCIE R&Sv5 Expanded Blueprint is meant to be used as a checklist that you can use as you go through your preparation.Click here to see INE's CCIE RSv5 Expanded Blueprint.
View ArticleProb. 2.1
So this may be just me missing something due to lack of sleep or oversight, but I see an IP address in the intial configs for the switch vlan 47, and for R4 int fa0/0 on vlan 47. Any reason we can't...
View ArticleStatic Nat order of operation on ASA pre-8.3
Dears,I was looking in forums and each one answers differently on the below question:which of the below takes precedence over the other in the NAT configuration on ASA pre-8.3:- static policy nat...
View ArticleEEM question
If I wanted to intercept config to any loopback interface I could use this:event cli pattern "^interface.* loop.*" sync yeshowever, this doesn't work for "int l<n>"I've tried event cli pattern...
View ArticleLab date swap
Hello All, I have my lab date booked for begining of August, but would like to bring it forward if I can. If anyone has a date booked in Bangalore for May/June but feel they need an extra couple of...
View ArticleDHCP Snooping
Good Day,I am working on DHCP Snooping.For example I have 3 x switches.Do you enable the following commands on all switches or only the switch connected to the DHCP Server:SW1Config tIp dhcp snoopingIp...
View Articles-2-s VPN - ASA & IOS - ikev2 - pki
Hi, after 2 nights which I spent on troubleshooting I decided to ask you for help. I have s-2-s VPN (ASA and IOS) with PSK and this one is working fine, no issues. I wanted to change the authentication...
View ArticleINE Design Exam videos
How much has changed from the 640-863 to the 640-864 ? I have access to the Design Exam video's but wonder if all are still relevant as the title references the 640-863 or has something else...
View ArticleINE's Rack rentals for v5
Hi ALL,INE has started rack rentals for practicing v5 workbooks/labs. I have not tried it yet but its a bit cheaper than for v4 :) 3 Tokens/HourI initially thought it would be more cheaper due to...
View ArticleNo need to clear ospf process?
Hello to all.Are there certain versions of IOS that does / does not need the clearing of the OSPF process for the hard coded RID to take effect? I have not yet tested this on real gear and I'm using...
View ArticleLaptop for CCNA Lab
I am about to set up a ccna lab. I bought a 2611xm router. Yet i will buy 1841 and 3550. I would like to know a laptop model to buy so that i can see the cisco ios. I am complete novice in this so i...
View ArticleClik here to view.
BGP Best Path Selection - Oldest Path VS Lowest Router ID
When does BGP decide to route via Oldest Path VS Lowest Router ID? Here I have a case where BGP selects oldest path and another lowest router ID:R3(config-if)#!right now, 1.2.3.4/32 is learned via...
View ArticleWhat happened to the UCS?
I encountered twice UCS hardware failures during yesterday and today. I can not access UCS from rack's server. It seemed that is no any ucs at the rack. I even can not reply INE's email, each time I...
View ArticleTrunk Mode on FC ports (MDS and UCS)
What is the 'proper' configuration for MDS interfaces facing the UCS? The INE guide instructs us on how to enable VSAN trunking on an FI, which results in the following config change:UCS-Lab-A(nxos)#...
View ArticleMPLS VPN QoS Tunneling
I am just wondering...what is the default tunneling mode in MPLS VPN or do we have to manually configure each mode?
View Article8.16 Filtering Auto-RP Messages - No rp maps at all?
Hi,I doing this lab, and I dont have anyting on any of my devices when doing a "show ip pim rp map".I been through the configuration a couple of times, and cant see that I miss anything.I found a...
View ArticleFull Scale lab1 OTV
In full scale lab 1 section 1.10 OTV.why they are using ip igmp version 3 in N3k and N4k on the interface e1/10 and interface port-channel 10 respectively.we already have configured ip igmp version 3...
View Article