Hey guys, I'm looking for a CCIE RS lab, and I saw two serie of devices, what do you think is better??
This lab:
R1 2610XM 2 - WIC-1T 128 32 (it will be at least 2610xm or better as 2620xm, 2650xm, I have to check)
R2 2610XM 2 - WIC-1T 128 32 (it will be at least 2610xm or better as 2620xm, 2650xm, I have to check)
R3 2611XM 1 - NM-4A/S128 32 (it will be at least 2611xm or better as 2621xm, 2651xm, I have to check)
R4 1841 2 - WIC-1T 256 64 (it will be with 384MB Dram and 128MB flash)
R5 1841 2 - WIC-1T 256 64 (it will be with 384MB Dram and 128MB flash)
R6 1841 1 - WIC-1T 256 64 (it will be with 384MB Dram and 128MB flash)
SW1 Catalyst 3560-24TS-E (it will be 3560-24TS-S updated to 3560-24TS-E, the same IOS Advanced IP Services)
SW2 Catalyst 3560-24TS-E (it will be 3560-24TS-S updated to 3560-24TS-E, the same IOS Advanced IP Services)
SW3 Catalyst 3550-24 EMI (it will be the same)
SW4 Catalyst 3550-24 EMI (it will be the same)
BB1 / Frame Relay Switch 2522 (it will be 3640 + 8 serial ports (2 x nm-4T) + at least 1 Ethernet port)
BB2 2501 N/A 16 16 (it will be the same)
BB3 2501 N/A 16 16 (it will be the same)
Access Server 2511
+ 12 x DB60 to DB 60
+ 12 x Ethernet Straight-Through cables
+ 18 x Ethernet Crossover cable
+ 13 x Power leads (UK version)
+ Racks Skeletek B16U, http://www.dantraknet.com/item/59
+ M6 screws for rack mount
+ brackets for all switches and routers
OR
2 x 2610XM with 128Mb DRAM/32Mb Flash
4 x 2611XM with 128Mb DRAM/32Mb Flass
FRAME RELAY SWITCH:
1 x 2610 with 64Mb DRAM/16Mb Flash;
8 Serial Ports (NM-8A/S module) IPv6-enabled (Frame Relay)
BACK-BONE ROUTERS:
2501 with 16Mb DRAM/16Mb Flash;
IOS: Ip Plus 12.2 with 2 Serial Ports (BB1).
2501 with 16Mb DRAM/16Mb Flash;
IOS: Ip Plus 12.2 with 2 Serial Ports (BB2).
2501 with 16Mb DRAM/16Mb Flash;
IOS: Ip Plus 12.2 with 2 Serial Ports (BB3).
TERMINAL SERVER:
2511 Access Server with 16Mb DRAM/16Mb Flash;
IOS: Ip Plus 12.2 - Ethernet Dual Serial 16-line (AS).
SWITCHES:
3550-24 EMI FE Ports, 2 G/E Ports – EMI Image
Layer 3 Switch Ip Services K9 12.2 (SW1)
3550-24 EMI Image FE Ports, 2 G/E Ports – EMI Image
Layer 3 Switch Ip Services K9 12.2 (SW2)
3550-24 EMI Image FE Ports, 2 G/E Ports – EMI Image
Layer 3 Switch Ip Services K9 12.2 (SW3)
3550-24 EMI Image FE Ports, 2 G/E Ports – EMI Image
Layer 3 Switch Ip Services K9 12.2 (SW4)
CABLES :
12 x Serial Cables
12 x CAT5 Straight Through Ethernet Cables
18 x CAT5 Crossover Ethernet Cables
15 x Power Cables (UK / Ireland only)
2 x Cab-Octal-Async cables
2 x Console Cable
Study Materials
The both labs are the same price.