Hi Guys,
I just got some new 3650's to play a bit with the stacking. Upon boot, I get the syslog msg "%PLATFORM_MGR-1-PLATMGR_INIT_FAIL: Platform Manager: Failed to set system LEDs after POST." (shown at the bottom of this post). I get this on both of my brand new switches, however the LED System LED light is actually lit. So does anyone know why this message is being displayed?
Booting...Initializing RAM +++++++@@@@@@@@...++++++++++++++++++++++++++++++++@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@done.
Memory Test Pass!
Base ethernet MAC Address: f0:7f:06:aa:75:80
Interface GE 0 link down***ERROR: PHY link is down
Initializing Flash...
flashfs[7]: 0 files, 1 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 6784000
flashfs[7]: Bytes used: 1024
flashfs[7]: Bytes available: 6782976
flashfs[7]: flashfs fsck took 1 seconds....done Initializing Flash.
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 79121160
Nova Bundle Image
--------------------------------------
Kernel Address : 0x6042d333
Kernel Size : 0x402ecf/4206287
Initramfs Address : 0x60830233
Initramfs Size : 0xdb98e6/14391526
Compression Format: .mzip
Bootable image at @ ram:0x6042d333
Bootable image segment 0 address range [0x81100000, 0x82110000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 377
Loading Linux kernel with entry point 0x81651310 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
All packages are Digitally Signed
Starting System Services
Jan 19 08:57:04 %PLATFORM_MGR-1-PLATMGR_INIT_FAIL: Platform Manager: Failed to set system LEDs after POST.