Hello,
i was practicing the Multicast lab from the INE workbook
i am using GNS3 with XR1 being Cisco-XRv and XR2 is a regular IOS
when simulating a sender from R8 and receiver from R7 it is not working
while it is working the other way around when the sender @ R7 and receiver @ R8
when the sender is R8 and there is a receiver @ R7, the (S,G) doesn't reach Xr1
i am sure from the config since it i working when reversing the roles
is it a bug with XR ??
Thanks
R8:sending pings with no receiver
XR2#sh ip mroute 224.90.90.90
(*, 224.90.90.90), 00:00:05/stopped, RP 20.20.20.20, flags: SP
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list: Null
(10.8.20.8, 224.90.90.90), 00:00:05/00:02:54, flags: PT
Incoming interface: FastEthernet0/0, RPF nbr 0.0.0.0
Outgoing interface list: Null
Receiver with sender
RP/0/0/CPU0:XR1#sh pim vrf VPN_A top 224.90.90.90
(*,224.90.90.90) SM Up: 00:00:06 RP: 20.20.20.20
JP: Join(00:00:43) RPF: GigabitEthernet0/0/0/4,10.19.20.20 Flags:
mdtVPN/A 00:00:06 fwd Join(00:03:23)
XR2#sh ip mroute 224.90.90.90
(*, 224.90.90.90), 00:02:44/00:03:25, RP 20.20.20.20, flags: S
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
GigabitEthernet3/0, Forward/Sparse, 00:01:05/00:03:25
(10.8.20.8, 224.90.90.90), 00:02:44/00:00:15, flags: T
Incoming interface: FastEthernet0/0, RPF nbr 0.0.0.0
Outgoing interface list:
GigabitEthernet3/0, Forward/Sparse, 00:01:05/00:03:25