I have
monitor session 1 destination interface Fa0/24 ingress untagged vlan 146
SW4#sh int fa0/24 status
Port Name Status Vlan Duplex Speed Type
Fa0/24 monitoring 1 a-full a-100 10/100BaseTX
note: port in vlan 1
SW4#sh mon sess 1
Session 1
---------
Type : Local Session
Source Ports :
Both : Fa0/8
Destination Ports : Fa0/24
Encapsulation : Native
Ingress : Enabled, default VLAN = 146 <---ingres vlan 146
Ingress encap : Untagged
question:
I should create on fa0/24 below connfig or not
---
int fa 0/24
switch mode access
switch access vlan 146
---
note: after I did this port is in vlan 146
---
SW4#sh int fa0/24 status
Port Name Status Vlan Duplex Speed Type
Fa0/24 monitoring 146 a-full a-100 10/100BaseTX
---