Configure SNMPv3 for group "admin" on R3 as per following requirements
Use location any
Use contact any
Use R3 loopback0 interface for SNMP trap as source
A SNMPv3 group admin has a user with a view privilege adminview and must view only ISO mib.
A SNMPv3 group admin has a user with a view privilege adminwrite and must write only system mib.
Ensure that group admin should be set with strongest security mechanism.
A user ccie should be from group admin and use md5 password of cisco (case sensitive)
Ensure that admin group only allow users access from 1.1.88.0/24
Use a SNMP v2c instance for NMS in 1.1.85.0/24 to accomplish this task.
Configure NetFlow on R1 according to the following requirements
Enable NetFlow on R1 to monitor the traffic entering and leaving Area 0 from BB1
Generate NetFlow sample one out-of-every 1000 packets
Export the flows to the server YY.YY.56.100 port 2222
In case the export to server fails, use backup server YY.YY.56.101 with the same port number.
Use R1 Loopback as source address for the exports
Use NetFlow version 9 with reliable transfer
Do not use policy-map