Trying to get boot from iSCSI going and I see that the UCS initiator can't reach the MDS. I'm curious if we should be able to ping the initiator on UCS. I'd like to test connectivity a little closer to UCS as there is some OTV and routing involved.
adapter 1/4/1 (mcp):1# iscsi_get_config
vnic iSCSI Configuration:
----------------------------
vnic_id: 9
link_state: Up
Initiator Cfg:
initiator_state: ISCSI_INITIATOR_READY
initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
vlan: 0
dhcp status: false
IQN: iqn.:initiator-ucs-blade:4
IP Addr: 1.1.1.1
Subnet Mask: 255.255.255.0
Gateway: 1.1.1.254
Target Cfg:
Target Idx: 0
State: INVALID
Prev State: ISCSI_TARGET_GET_SESSION_INFO
Target Error: ISCSI_TARGET_LOGIN_ERROR
IQN: iqn.virtual-iscsi-disk-vsan10
IP Addr: 2.1.1.1
Port: 3260
Boot Lun: 0
Ping Stats: Failed - Connection timed out
Thanks, Gregg