Hi
I have question about switching off split horizon on R5 - link connected to FR cloud.
On R2 in topology I see only:
R2#sh ip eigrp 100 topology 150.1.2.0/24
EIGRP-IPv4 Topology Entry for AS(100)/ID(2.2.2.2) for 150.1.2.0/24
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 128256
Descriptor Blocks:
0.0.0.0 (Loopback0), from Connected, Send flag is 0x0
Composite metric is (128256/0), route is Internal
Vector metric:
Minimum bandwidth is 10000000 Kbit
Total delay is 5000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 9676
Hop count is 0
Originating router is 2.2.2.2
R2#
I can't see prefix 150.1.2.0/24 from R5 via FR link.
1 06:52:49.295 Ignored route, metric: 150.1.2.0/24 2809856
3 06:52:49.223 Conn rt change: 150.1.2.0/24 Loopback0
5 06:52:49.223 Metric set: 150.1.2.0/24 128256
7 06:52:49.223 Update sent, RD: 150.1.2.0/24 4294967295
9 06:52:49.223 Update sent, RD: 150.1.2.0/24 4294967295
10 06:52:49.223 Route installed: 150.1.2.0/24 0.0.0.0
11 06:52:49.223 Find FS: 150.1.2.0/24 4294967295
13 06:52:49.223 Rcv update dest/orig: 150.1.2.0/24 Connected
14 06:52:49.223 Metric set: 150.1.2.0/24 4294967295
15 06:52:49.223 Conn rt change: 150.1.2.0/24 Loopback0
16 06:52:32.579 NDB delete: 150.1.2.0/24 1
17 06:52:32.579 Poison squashed: 150.1.2.0/24 rt net gone
18 06:52:32.579 RDB delete: 150.1.2.0/24 155.1.0.5
19 06:52:32.579 RDB delete: 150.1.2.0/24 0.0.0.0
20 06:52:32.579 Find FS: 150.1.2.0/24 4294967295
21 06:52:32.579 Free reply status: 150.1.2.0/24
23 06:52:32.579 Clr handle dest/cnt: 150.1.2.0/24 0
25 06:52:32.579 Rcv reply dest/nh: 150.1.2.0/24 155.1.0.5
27 06:52:28.607 Send reply: 150.1.2.0/24 155.1.0.5
29 06:52:28.607 Rcv query dest/nh: 150.1.2.0/24 155.1.0.5
31 06:52:28.531 Metric set: 150.1.2.0/24 4294967295
32 06:52:28.531 Active net/peers: 150.1.2.0/24 65536
34 06:52:28.531 Find FS: 150.1.2.0/24 128256
36 06:52:28.531 Rcv update dest/orig: 150.1.2.0/24 Connected
37 06:52:28.531 Conn rt down: 150.1.2.0/24 Loopback0
*Jan 28 07:06:52.171: %LINK-3-UPDOWN: Interface Loopback0, changed state to up
*Jan 28 07:06:53.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Jan 28 07:06:53.175: EIGRP-IPv4(100): dest(150.1.2.0/24) not active
*Jan 28 07:06:53.175: EIGRP-IPv4(100): rcvupdate: 150.1.2.0/24 via Connected metric 128256/0 on tid 0
*Jan 28 07:06:53.175: EIGRP-IPv4(100): Find FS for dest 150.1.2.0/24. FD is 4294967295, RD is 4294967295 on tid 0found
*Jan 28 07:06:53.175: DUAL: AS(100) RT installed 150.1.2.0/24 via 0.0.0.0
*Jan 28 07:06:53.175: DUAL: AS(100) Send update about 150.1.2.0/24. Reason: metric chg on tid 0
*Jan 28 07:06:53.175: DUAL: AS(100) Send update about 150.1.2.0/24. Reason: new if on tid 0
We can see, that reported distance is 4294967295. This is caused by poison reverse on R5.
My IOS is version is adventerprisek9-mz.151-3.T2.
Thanks in advance.
regards
Mateusz