I don't know if my solution is acceptable or not, but it may just be an interpretation issue on my part.
The task states:
• Advertise VLAN 33 and R3’s interface connected to SW3into the EIGRP
domain.
• These prefixes should appear as follows throughout the EIGRP domain:
D EX 204.12.X.0 [170/…
D EX 183.X.39.0 [170/…
In the solution guide it says to build a route-map referencing the interfaces; however, I did a route-map with a prefix list referencing the subnets. Is this an acceptable solution? The reason why I bring it up is the issue of having the route-map there for redistributing routes from a previous task in 2.1 doesn't apply. Thanks!