Hi,
Any idea why the following doesn't work ?
Rack1R5#sh run | s ipv6 router ospf 1|ipv6 route
ipv6 route ::/0 Null0
ipv6 router ospf 1
log-adjacency-changes
redistribute static
Rack1R1#sh ipv route ospf
IPv6 Routing Table - 6 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
Thank you,
Ciprian.